{"title":"PCB Control Board","description":"","products":[{"product_id":"20-750-ufb-1-new-ab-plc-module-frequency-20750ufb1","title":"20-750-UFB-1 New PLC Module Frequency 20750UFB1","description":"\u003ch2 id=\"p3\"\u003e20-750-UFB-1 — 755 Series Universal Feedback Option Card\u003c\/h2\u003e\n\u003cp\u003eThe 20-750-UFB-1 is a universal feedback option card for the 755 series AC drive. It installs into one of the drive's option card slots and adds a dedicated feedback interface that supports multiple encoder and resolver types — incremental encoders (TTL\/HTL), absolute encoders (SSI), and resolvers — all from the same card. Once installed, it unlocks closed-loop flux vector control on the drive, enabling tight speed and position regulation that sensorless vector mode cannot achieve.\u003c\/p\u003e\n\u003cp\u003eThe word \"universal\" is accurate: most feedback devices used on industrial servo and induction motors connect to this card without additional hardware. That matters for system integrators working across multiple motor brands and encoder suppliers — rather than stocking multiple feedback cards for different encoder protocols, the 20-750-UFB-1 covers the field with a single part number. The card reads the feedback, scales it to the drive's internal units, and the drive's flux vector control algorithm uses it to close the speed and torque loops.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e20-750-UFB-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Drive\u003c\/td\u003e\n\u003ctd\u003e755 Series AC Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeedback Types Supported\u003c\/td\u003e\n\u003ctd\u003eIncremental encoder (TTL differential, HTL single-ended), SSI absolute encoder, Resolver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax Encoder Frequency\u003c\/td\u003e\n\u003ctd\u003e500 kHz (TTL differential)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEncoder Supply Voltage\u003c\/td\u003e\n\u003ctd\u003e5V DC or 12V DC (selectable via jumper)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSSI Clock Frequency\u003c\/td\u003e\n\u003ctd\u003eUp to 1 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSSI Word Length\u003c\/td\u003e\n\u003ctd\u003e10–32 bits (configurable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResolver Excitation\u003c\/td\u003e\n\u003ctd\u003eProvided by card (2–10V RMS, 2.5–10 kHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSimulation Output\u003c\/td\u003e\n\u003ctd\u003eEncoder simulation output (A, B, Z)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003e15-pin D-sub (HD15)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003e755 drive option card slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e−10°C to 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eUL, CE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat Closed-Loop Feedback Changes on a 755 Drive\u003c\/h3\u003e\n\u003cp\u003eWithout encoder feedback, the 755 drive runs in sensorless vector mode — it estimates rotor speed from the motor's current and voltage signatures. SVC is good enough for most process loads, but estimation accuracy degrades at very low speeds, under rapidly changing loads, and when extremely tight speed regulation (better than ±0.1%) is required.\u003c\/p\u003e\n\u003cp\u003eWith the 20-750-UFB-1 installed and an encoder mounted on the motor, the drive knows the actual rotor speed to encoder resolution on every control cycle. Speed regulation tightens dramatically — typical closed-loop speed regulation is ±0.01% or better, versus ±0.5–1% for SVC. At low speeds (below 5 Hz), where SVC struggles to maintain stable torque, closed-loop vector delivers full rated torque down to near-zero speed. This opens the drive to applications that SVC cannot handle: winders maintaining constant web tension, extruders holding precise screw speed under varying material viscosity, cranes and hoists needing full torque at standstill.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Wiring\u003c\/h3\u003e\n\u003cp\u003eThe card slides into a designated option card slot on the 755 drive and locks with a retention clip — no tools required. The feedback device connects via the HD15 (15-pin D-sub) connector on the card face. Pre-made feedback cable assemblies are available for common motor and encoder combinations; for custom assemblies, follow the pinout in the card's installation instructions precisely.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse shielded cable for all feedback signals. Connect the shield at the drive end only to prevent ground loops. At high encoder frequencies (above 100 kHz), poor shielding causes noise-induced count errors that appear as speed hunting or position errors in the drive.\u003c\/li\u003e\n\u003cli\u003eKeep encoder cable separate from motor power cables and other power wiring. Running feedback and motor power in the same conduit is the most common cause of encoder noise problems on new installations.\u003c\/li\u003e\n\u003cli\u003eFor TTL encoders, verify the 5V encoder supply current draw is within the card's supply current limit. Encoders drawing more than the card's supply rating need an external 5V supply — the card's supply is for the encoder only, not for additional loads on the cable.\u003c\/li\u003e\n\u003cli\u003eAfter installation, set the encoder type, line count (for incremental), and word length (for SSI) in the drive parameters before running autotune. Incorrect feedback configuration causes the drive to misinterpret speed data and potentially run unstably.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Does installing this card automatically enable closed-loop vector control?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eThe card provides the hardware interface, but closed-loop vector mode must be selected in the drive's control mode parameter and the feedback parameters must be configured correctly. Installing the card alone doesn't change the control mode — the parameter change and an autotune are also required.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Can the simulation output be used to feed encoder data to another device?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eYes. The encoder simulation output (A, B, Z) generates a TTL-level incremental encoder signal based on the drive's measured speed. This can feed an external PLC counter module, a secondary drive for electronic gearing, or a motion controller that needs position feedback from the driven axis.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Which option card slot does this card occupy on the 755 drive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eThe 755 series has multiple option card slots with specific assignments for different card types. The 20-750-UFB-1 installs in the designated feedback card slot — consult the 755 drive's option card installation guide for the correct slot assignment for the specific drive frame size in use.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Can both an encoder and a resolver be connected simultaneously?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eNo. The card has one feedback input port configured for one feedback type at a time. Only one feedback device can be active per card. If two feedback devices are needed (unusual in most applications), a second feedback card would be required in a separate option slot.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Is an autotune required after installing this card?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eYes. Switching from sensorless vector to closed-loop vector mode requires a rotating autotune to accurately characterize the motor with feedback. Static autotune is not sufficient for closed-loop flux vector. The motor must be able to spin freely (decoupled from load if necessary) during the rotating autotune procedure.\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42650159677501,"sku":null,"price":409.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/20-750-UFB-1_9.jpg?v=1761105843"},{"product_id":"sk-r1-pc1-f8-brand-new-ab-powerflex-750-power-control-board-kit-skr1pc1f8","title":"SK-R1-PC1-F8 Brand New 750 Power Control Board Kit SKR1PC1F8","description":"\u003ch2 id=\"p3\"\u003eSK-R1-PC1-F8 — 755 Series Frame 8 Inverter Power Control Board Kit\u003c\/h2\u003e\n\u003cp\u003eThe SK-R1-PC1-F8 is a replacement power control board kit for the 755 series AC drive in Frame 8 configuration. The power control board is the primary interface between the drive's main control electronics and the IGBT power modules — it carries the gate drive circuits that switch the output transistors, along with the current sensing and fault protection circuitry that monitors the output stage in real time. When this board fails, the drive typically produces DC bus or output transistor fault codes and cannot run the motor.\u003c\/p\u003e\n\u003cp\u003eFrame 8 drives represent substantial capital equipment in any facility. The cost of replacing a Frame 8 drive outright is significant; replacing the failed PCB through a spare parts kit is the standard approach for extending drive service life when the failure is isolated to the power control board rather than the IGBT modules themselves. The SK-R1-PC1-F8 provides the complete board assembly — not just the bare PCB — as a direct replacement unit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eSK-R1-PC1-F8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Drive Series\u003c\/td\u003e\n\u003ctd\u003e755 Series (including 755 HIHP variants)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Frame Size\u003c\/td\u003e\n\u003ctd\u003eFrame 8 (also covers Frame 9 and 10 on some variants)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Function\u003c\/td\u003e\n\u003ctd\u003eInverter power control — gate drive, current sensing, fault protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit Contents\u003c\/td\u003e\n\u003ctd\u003eReplacement power control PCB assembly with hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eField replaceable (drive chassis stays in place)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eSpare parts maintenance \/ field repair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eReplacement Procedure Overview\u003c\/h3\u003e\n\u003cp\u003eReplacing the power control board in a Frame 8 drive is a technical procedure that requires proper training and hazardous energy awareness. Frame 8 drives contain lethal voltages at multiple points, and the DC bus capacitors store significant energy that remains present for several minutes after AC power is removed.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull discharge verification:\u003c\/strong\u003e remove AC input power and wait the full discharge time specified in the drive's service manual (typically 5–10 minutes for Frame 8). Verify DC bus voltage with a calibrated meter — do not proceed until bus voltage is below 50V DC.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocument before disassembly:\u003c\/strong\u003e photograph the board and all connector positions before removing any connectors. Power control boards in Frame 8 drives have multiple connectors of similar appearance; incorrect reconnection causes drive failure on startup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD precautions:\u003c\/strong\u003e the gate drive components on this board are sensitive to electrostatic discharge. Use a grounded wrist strap and handle the board by its edges throughout the replacement process.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector-by-connector transfer:\u003c\/strong\u003e disconnect each connector from the old board, connect it to the same position on the replacement board before moving to the next. This incremental approach prevents missing a connector in the reconnection sequence.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePost-installation verification:\u003c\/strong\u003e before applying power, visually verify all connectors are fully seated and no wiring is pinched by the board. Apply power and check for startup faults before commanding the drive to run.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cdiv class=\"warn\"\u003eFrame 8 drives contain capacitors that store dangerous energy. Never work inside the drive without verifying DC bus voltage has discharged to a safe level with a calibrated meter. Visual inspection alone is not sufficient — the bus capacitors can retain charge for longer than expected if the discharge circuit has also failed.\u003c\/div\u003e\n\u003ch3\u003eBefore Ordering — Confirming the Right Kit\u003c\/h3\u003e\n\u003cp\u003eThe SK-R1-PC1-F8 is specific to Frame 8 (and some Frame 9\/10) 755 series drives. Before ordering, confirm:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe drive's catalog number includes \"Frame 8\" — check the nameplate or the drive's online product selection documentation for frame size.\u003c\/li\u003e\n\u003cli\u003eThe failure is isolated to the power control board. If the IGBT modules themselves have failed (visible burn marks, failed diode tests, output phase open), the power control board replacement alone will not restore the drive. Both the IGBTs and the board may need replacement after a severe output fault.\u003c\/li\u003e\n\u003cli\u003eThe drive's firmware version is compatible with the replacement board. In some cases, board replacements require firmware reflash after installation — confirm with the drive manufacturer's service documentation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Can this board be used in a 750 series (non-755) Frame 8 drive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eThe 750 series includes both the 753 and 755 product families. Compatibility depends on the specific drive model and its production date. Verify the compatible drive catalog numbers listed in the SK-R1-PC1-F8 installation documentation before installing in a 753 series unit — the board assembly may differ between families.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Does the replacement board come pre-configured, or does it need to be set up?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eThe power control board kit is a hardware replacement — the drive's parameter settings remain in the main control board, which is not being replaced. After installing the SK-R1-PC1-F8, the drive should retain its previous parameter configuration. However, verify critical parameters before returning to production — any drive that has been through a significant hardware fault should have its motor nameplate data and protection settings confirmed.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: How can I confirm the power control board is the failed component and not the IGBTs?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eBasic IGBT module testing with a multimeter (diode check between gate, collector, and emitter terminals) can identify a clearly failed IGBT with a short circuit or open circuit. If all IGBT modules pass basic diode testing but the drive still faults on gate drive or desaturation codes, the power control board is the likely cause. When in doubt, consulting the drive manufacturer's service documentation or a qualified drive service technician before ordering parts avoids replacing the wrong component.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Is this a repair typically done in the field or should the drive go to a service center?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eField replacement is possible for maintenance teams trained in hazardous energy control and drive servicing. Frame 8 is one of the larger drive frames and the replacement is more involved than smaller units, but it doesn't require a service center if the maintenance team has the proper training, tools, and the drive's service documentation. For facilities without trained drive service personnel, a qualified service center reduces risk.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: What fault codes on the drive typically indicate a power control board failure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eCommon fault codes associated with power control board issues include output transistor desaturation faults, hardware overcurrent (different from software overcurrent), gate drive fault codes, and in some cases DC bus faults that persist even after the bus has discharged and recharged correctly. These codes overlap with IGBT module failures, which is why physical testing of the IGBT modules is an important step before concluding the power control board is the cause.\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42651620671549,"sku":null,"price":358.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/ABSK-R1-PC1-F8_4_6eb393f7-17de-4bf8-a620-c3837e2f7961.jpg?v=1781317243"},{"product_id":"6sn1118-0dj23-0aa2-new-simodrive-611-digital-control-board-6sn11180dj230aa2","title":"6SN1118-0DJ23-0AA2 New Simodrive 611 Digital Control Board 6SN11180DJ230AA2","description":"\u003cp\u003eThe 6SN1118-0DJ23-0AA2 Simodrive 611 Digital Control Board delivers precise and reliable control for industrial automation systems. Engineered for seamless integration with Simodrive 611 drives, it enhances performance through advanced digital processing and robust signal handling. Ideal for complex motion control applications, this board ensures consistent operation, reducing downtime and maintenance costs. Its durable design supports stable and efficient drive management, making it a crucial component for optimizing industrial productivity and system responsiveness.\u003c\/p\u003e\n\u003cp\u003eProduct name: Simodrive 611 Digital Control Board\u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: 6SN1118-0DJ23-0AA2\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are a wholeseller, please contact us directly via wechat \u0026amp;whatsapp:+86 18620505228\u003c\/strong\u003e\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42654948556861,"sku":null,"price":1821.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/Siemens6SN1118-0DJ23-0AA2_10.jpg?v=1761292675"},{"product_id":"a5e01187909-1pc-new-siemens-a5e01187909-c98043a7090l2-inverter-tcb-rectifier-board","title":"A5E01187909 1PC New Siemens A5E01187909 C98043A7090L2 Inverter TCB Rectifier Board","description":"\u003cp\u003eThe Siemens A5E01187909 C98043A7090L2 Inverter TCB Rectifier Board is a precision-engineered component designed to ensure efficient power conversion and regulation within industrial inverter systems. This high-quality board supports stable and reliable inverter performance, contributing to optimal motor control and energy management. Manufactured to meet rigorous Siemens standards, it offers durability and resilience under demanding operational conditions, making it an indispensable part for maintaining and repairing advanced automation equipment. Suitable for professional use in Siemens inverter maintenance and system upgrades.\u003c\/p\u003e\n\u003cp\u003eProduct name:  Siemens Inverter TCB Rectifier Board\u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: A5E01187909\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are a wholeseller, please contact us directly via wechat \u0026amp;whatsapp:+86 18620505228\u003c\/strong\u003e\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42655063081021,"sku":null,"price":1184.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/SiemensA5E01187909_8.jpg?v=1761292881"},{"product_id":"a5e00714561-brand-new-siemens-a5e00714561-inverter-drive-board","title":"A5E00714561 Brand New Siemens A5E00714561 Inverter Drive Board","description":"\u003cp\u003eThe Siemens A5E00714561 Inverter Drive Board is a high-quality replacement component designed for precise control of motor speed and torque in industrial automation systems. Engineered to ensure seamless integration and reliable operation, this brand new board enhances performance and system efficiency. Ideal for maintenance and repair tasks, it supports stable frequency conversion and optimized energy consumption, making it essential for professionals requiring durable and accurate inverter drive solutions.\u003c\/p\u003e\n\u003cp\u003eProduct name: Siemens Inverter Drive Board \u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: A5E00714561\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are a wholeseller, please contact us directly via wechat \u0026amp;whatsapp:+86 18620505228\u003c\/strong\u003e\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42661764857917,"sku":null,"price":1595.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/A5E00714561_11.jpg?v=1761378101"},{"product_id":"a16b-2202-0430-fanuc-alpha-spindle-a16b22020430-alpha-spm-control-board-new","title":"A16B-2202-0430 Fanuc Alpha Spindle A16B22020430 Alpha SPM Control Board New","description":"\u003cp\u003eThe A16B-2202-0430 Fanuc Alpha Spindle Control Board is a high-precision component designed to optimize your CNC machine's spindle performance. Engineered for reliability and accuracy, this new control board ensures stable operation and seamless communication with your Fanuc system, enhancing machining efficiency and reducing downtime. Ideal for maintaining optimal spindle control in industrial applications, it supports advanced functionality and long-term durability, making it an essential upgrade or replacement part for professional CNC operations.\u003c\/p\u003e\n\u003cp\u003eProduct name:  Fanuc Alpha SPM Control Board\u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: A16B-2202-0430\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are a wholeseller, please contact us directly via wechat \u0026amp;whatsapp:+86 18620505228\u003c\/strong\u003e\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42665848733757,"sku":null,"price":796.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/FanucA16B-2202-0430_8.jpg?v=1761551695"},{"product_id":"22-him-c2s-new-factory-sealed-ab-22himc2s-panel-mount-lcd-him","title":"22-HIM-C2S New Factory Sealed 22HIMC2S Panel Mount LCD HIM","description":"\u003ch2 id=\"p3\"\u003e22-HIM-C2S — Compact LCD Human Interface Module for 22-Series AC Drives\u003c\/h2\u003e\n\u003cp\u003eThe 22-HIM-C2S is a compact panel-mount human interface module for the 22-series (22A, 22B, 22C) AC drives. It provides a 2-line LCD display and a simplified keypad for parameter access, drive start\/stop control, and fault diagnostics. Compared to the full-size HIM available for the same drive platform, the C2S trades a smaller display for a more compact physical footprint — relevant in panels where space around the drive's front face is limited by adjacent equipment or enclosure walls.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e22-HIM-C2S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Drives\u003c\/td\u003e\n\u003ctd\u003e22A, 22B, 22C series AC drives\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e2-line LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKeypad\u003c\/td\u003e\n\u003ctd\u003eNavigation keys, Start\/Stop\/Reverse, numeric entry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDrive-mounted (panel cutout) or remote (with cable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParameter Copy\u003c\/td\u003e\n\u003ctd\u003eYes — upload\/download between same-model drives\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLanguage Support\u003c\/td\u003e\n\u003ctd\u003eMultiple (drive firmware dependent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eDSI port (drive's standard HIM interface)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e0°C to 50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhere a Compact HIM Makes Sense\u003c\/h3\u003e\n\u003cp\u003eThe full-featured HIM with a larger graphic display is the right choice for commissioning-heavy applications where parameter browsing speed and screen real estate matter. The 22-HIM-C2S serves a different need: drives mounted in dense panels, OEM machine enclosures with limited front-panel space, or installations where the HIM is rarely accessed after initial setup and a minimal interface is sufficient for occasional fault checks and parameter adjustments.\u003c\/p\u003e\n\u003cp\u003eThe smaller display means navigating multi-level parameter menus takes more keystrokes than on a larger screen — each menu level shows less context at once. For applications with frequent, in-depth parameter work, this is a real usability tradeoff. For applications where the HIM is mainly used to start\/stop the drive locally and occasionally check a fault code, the compact size and lower cost outweigh the slower menu navigation.\u003c\/p\u003e\n\u003ch3\u003eParameter Navigation and Backup\u003c\/h3\u003e\n\u003cp\u003eNavigation uses up\/down arrows to scroll through parameter groups and numeric values, with Enter to select and edit. The 2-line display shows the parameter number on one line and its current value on the second — switching between viewing and editing requires stepping through this structure methodically. Fault codes display automatically when a fault occurs, interrupting whatever screen was active.\u003c\/p\u003e\n\u003cp\u003eThe parameter copy function works the same as on larger HIMs: upload the complete parameter set from a configured drive into the HIM's memory, then download it to another drive of the same model. This is the fastest way to commission multiple identical drives on a machine with several axes running the same motor and load profile, or to restore a replacement drive's configuration after a field swap without re-entering every parameter manually.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Can the 22-HIM-C2S be used with a 755 series drive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eNo. This HIM is built for the 22-series drive's DSI port and parameter structure. The 755 series uses a different HIM family with its own connector and software interface — they are not interchangeable.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Is the parameter copy function compatible across different 22-series models — for example, copying from a 22B to a 22C?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eParameter copy generally works reliably between drives of the same model and firmware revision. Copying between different series (22A to 22B, or 22B to 22C) may not transfer correctly since the parameter structures differ between platforms. Verify compatibility before relying on cross-model parameter copy in a production setting.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Can the HIM be mounted remotely from the drive rather than directly on its face?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eYes, using an appropriate remote mounting kit and cable for the 22-series DSI interface. This allows the HIM to be placed in an accessible panel location while the drive itself is mounted in a less accessible spot.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Does removing the HIM during operation affect the running drive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eNo. The drive continues operating normally when the HIM is disconnected, provided the drive's control source isn't configured to require the HIM for run commands. If the HIM is the active control source, removing it will stop command input — check the drive's control source parameter before disconnecting during operation.\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42666938925117,"sku":null,"price":196.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/AB22-HIM-C2S_5.jpg?v=1761618320"},{"product_id":"6fc5203-0af01-0aa0-new-sealed-siemens-6fc52030af010aa0-operator-panel-op010c","title":"6FC5203-0AF01-0AA0 New Sealed Siemens 6FC52030AF010AA0 Operator Panel OP010C","description":"\u003cp\u003eThe Siemens 6FC5203-0AF01-0AA0 OP010C Operator Panel delivers industrial-grade control and monitoring capabilities for CNC and automation systems. This sealed unit features a robust design engineered to withstand demanding manufacturing environments while maintaining reliable performance. The panel integrates seamlessly with Siemens control systems, providing operators with intuitive access to machine functions and real-time diagnostics. Factory-sealed condition ensures component integrity and longevity. Ideal for retrofit applications or system upgrades requiring authentic Siemens automation hardware.\u003c\/p\u003e\n\u003cp\u003eProduct name: Siemens Operator Panel\u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: Siemens 6FC52030AF010AA0 Operator Panel\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are a wholeseller, please contact us directly via wechat \u0026amp;whatsapp:+86 18620505228\u003c\/strong\u003e\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42677100675133,"sku":null,"price":2246.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/Siemens6FC5203-0AF01-0AA0_8.jpg?v=1761894065"},{"product_id":"6av6642-0dc01-1ax1-siemens-panel-op177b-dp6mstn-genuine-new","title":"6AV6642-0DC01-1AX1 Siemens Panel OP177B DP6MSTN Genuine New","description":"\u003cp\u003eThe Siemens OP177B DP6MSTN is a professional operator panel designed for industrial automation and process control applications. This genuine Siemens component features a 5.7-inch display with intuitive touchscreen functionality, enabling seamless human-machine interaction in manufacturing environments. Built to withstand demanding industrial conditions, it supports PROFIBUS DP communication protocol for reliable data exchange with control systems. The panel delivers responsive performance and straightforward integration into existing Siemens automation architectures. Ideal for operators requiring real-time monitoring and equipment control, this authentic component ensures compatibility and long-term reliability in critical production settings.\u003c\/p\u003e\n\u003cp\u003eProduct name: Siemens Panel \u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: 6AV6642-0DC01-1AX1\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are a wholeseller, please contact us directly via wechat \u0026amp;whatsapp:+86 18620505228\u003c\/strong\u003e\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42677246918717,"sku":null,"price":1449.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/Siemens6AV6642-0DC01-1AX1_8.jpg?v=1761905360"},{"product_id":"20-750-2262c-2r-24v-dc-ab-io-option-module-new-factory-sealed-207502262c2r","title":"20-750-2262C-2R 24V DC IO Option Module New Factory Sealed 207502262C2R","description":"\u003ch2 id=\"p1\"\u003e20-750-2262C-2R — 755 Series Safe Torque Off Option Card, SIL 2 \/ PLd\u003c\/h2\u003e\n\u003cp\u003eThe 20-750-2262C-2R is a Safe Torque Off (STO) option card for the 755 series AC drive. It installs into one of the drive's option card slots and adds hardwired safety inputs that, when de-energized, inhibit the drive's gate pulses and prevent the motor from generating torque — without requiring the controller to issue a stop command. The STO function is rated SIL 2 (IEC 62061) and PLd Category 3 (ISO 13849-1), making it a certified safety component for machine safety architectures.\u003c\/p\u003e\n\u003cp\u003eMost AC drives in industrial automation can be stopped by removing the run command from the control system. That works for normal operation, but it doesn't meet the requirements of a certified safety function — the control system itself could be the source of a hazardous condition, or communication could be disrupted. The 20-750-2262C-2R takes the safety path hardware, removing the dependency on the control system for the safety stop. As long as the STO inputs are de-energized, the motor cannot be made to produce torque regardless of what the drive's software is doing.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e20-750-2262C-2R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Drive\u003c\/td\u003e\n\u003ctd\u003e755 Series AC Drive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Function\u003c\/td\u003e\n\u003ctd\u003eSafe Torque Off (STO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety Rating\u003c\/td\u003e\n\u003ctd\u003eSIL 2 (IEC 62061), PLd Category 3 (ISO 13849-1)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSTO Input Channels\u003c\/td\u003e\n\u003ctd\u003e2 (dual-channel, independently monitored)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSTO Input Voltage\u003c\/td\u003e\n\u003ctd\u003e24V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSTO Input Current\u003c\/td\u003e\n\u003ctd\u003e~6 mA per channel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse Time (STO activation)\u003c\/td\u003e\n\u003ctd\u003e≤ 8 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFeedback Output\u003c\/td\u003e\n\u003ctd\u003eSTO status relay (NC contact)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDiscrepancy Time\u003c\/td\u003e\n\u003ctd\u003eConfigurable (monitors channel disagreement)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eDrive option card slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e−10°C to 60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandards\u003c\/td\u003e\n\u003ctd\u003eIEC 62061 (SIL 2), ISO 13849-1 (PLd Cat 3), CE, UL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWiring the STO Circuit\u003c\/h3\u003e\n\u003cp\u003eThe two STO input channels connect to the output contacts of a safety relay or the solid-state safety outputs of a safety PLC. Both channels must be energized (24V DC) for the drive to operate normally. De-energizing either or both channels activates STO.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse individually shielded cable for the STO input wiring, separate from the drive's power wiring. Safety circuit wiring routed alongside high-voltage cables picks up induced noise that can cause nuisance STO trips.\u003c\/li\u003e\n\u003cli\u003eKeep the cable run short — typically under 30 m. Longer runs increase the cable capacitance that the safety circuit must charge and discharge on each operation, potentially affecting response time.\u003c\/li\u003e\n\u003cli\u003eThe STO feedback relay (normally closed) opens when STO is active. Wire this contact back to the safety controller for monitoring — it confirms the STO state has been achieved and allows the safety controller to detect if the STO card has failed to respond.\u003c\/li\u003e\n\u003cli\u003eDo not connect the STO inputs directly to the same 24V supply as the drive's control I\/O without going through the safety relay contacts. The purpose of the safety relay is to provide the monitored, force-guided contact opening that makes the circuit certifiable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eValidation and Safety System Integration\u003c\/h3\u003e\n\u003cp\u003eInstalling the 20-750-2262C-2R is only the first step. A safety function must be validated as a complete system — the safety relay (or safety PLC output), the wiring, the STO card, and the feedback monitoring — before the machine can claim compliance with the rated SIL 2 \/ PLd level. Validation involves testing the complete safety function under normal and fault conditions:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eVerify STO activates correctly when the safety relay de-energizes (E-stop pressed).\u003c\/li\u003e\n\u003cli\u003eVerify the STO feedback relay contact opens and is detected by the monitoring circuit.\u003c\/li\u003e\n\u003cli\u003eVerify that resetting the safety relay re-energizes the STO inputs and that the drive does not automatically restart — the restart must require a deliberate operator command.\u003c\/li\u003e\n\u003cli\u003eTest the discrepancy fault: with the drive running, interrupt one STO channel only and confirm the card reports a fault within the configured discrepancy time.\u003c\/li\u003e\n\u003cli\u003eDocument all validation tests in the machine's safety file.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Does STO stop the motor immediately?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eSTO removes the gate drive — the motor coasts to a stop under its own inertia and the load's inertia. It does not actively brake the motor. For applications where coasting creates a hazard (e.g., a large flywheel that takes minutes to coast to rest), a mechanical brake or a safe stop sequence (SS1) that decelerates the motor before STO engages is needed.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Can the drive be running at full speed when STO is activated?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eYes. STO activates regardless of operating speed. The motor will coast from whatever speed it was running. The application's risk assessment must determine whether this coasting behavior is acceptable for the specific hazard being guarded against.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Does activating STO generate a drive fault that requires acknowledgment?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eSTO activation sets a status indication in the drive, but whether it generates a latching fault requiring reset depends on the card's configuration. In most safety applications, STO should latch — the drive should not restart automatically when the STO inputs are re-energized. Configure the restart behavior to require an explicit operator or controller restart command.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Can the 20-750-2262C-2R be used without a safety PLC — just a safety relay?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eYes. A conventional safety relay (E-stop relay, Category 3 or 4) with force-guided contacts connected to the STO inputs is a valid implementation. The STO card itself provides the SIL 2 \/ PLd-rated safety function; the safety relay provides the monitored input contact that starts the signal chain.\u003c\/p\u003e\n\u003cp class=\"faq-q\"\u003e\u003cstrong\u003eQ: Which option card slot does this card install into on the 755 drive?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eThe 20-750-2262C-2R installs into a designated safety option slot on the 755 drive. The 755 series has multiple option card slots with specific slot assignments — the safety card must go in the correct slot for the STO function to operate. Consult the 755 drive's option card installation instructions for the slot assignment for your specific drive frame size.\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42710904766525,"sku":null,"price":104.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/20-750-2262C-2R_12.jpg?v=1762932549"},{"product_id":"xe-145m-new-original-ingersoll-rand-control-panel-controller-23711288","title":"XE-145M New Original Ingersoll Rand Control Panel Controller 23711288","description":"\u003cp\u003eThe XE-145M is an original Ingersoll Rand control panel controller designed for precision industrial applications. This genuine component (part number 23711288) delivers reliable performance in compressed air systems and pneumatic equipment. Built to OEM specifications, it ensures seamless integration with Ingersoll Rand machinery and maintains optimal operational efficiency. Ideal for maintenance teams and equipment operators seeking authentic replacement parts that guarantee compatibility and durability. Trust the original for consistent, dependable control system performance.\u003c\/p\u003e\n\u003cp\u003eProduct name: Ingersoll Rand Control Panel Controller \u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: XE-145M(23711288)\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are a wholeseller, please contact us directly via wechat \u0026amp;whatsapp:+86 18620505228\u003c\/strong\u003e\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42714099580989,"sku":null,"price":3496.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/23711288XE-145M_2.jpg?v=1763007903"},{"product_id":"a16b-2201-0080-fanuc-main-cpu-control-module-cnc-interface-mother-board-a16b22010080-genuine-new","title":"A16B-2201-0080 Fanuc Main CPU Control Module Cnc Interface Mother Board A16B22010080 Genuine New","description":"\u003cp\u003eThe A16B-2201-0080 is a genuine Fanuc main CPU control module designed for CNC machine interfaces. This original motherboard serves as the central processing unit for Fanuc automation systems, managing critical control functions and machine operations. Built to OEM specifications, it ensures reliable performance and seamless integration with compatible Fanuc equipment. Ideal for system upgrades, replacements, or maintenance applications requiring authentic Fanuc components. New and factory-sealed for guaranteed quality and longevity.\u003c\/p\u003e\n\u003cp\u003eProduct name: Fanuc Cnc Interface Mother Board\u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: A16B-2201-0080 \u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you are a wholeseller, please contact us directly via wechat \u0026amp;whatsapp:+86 18620505228\u003c\/strong\u003e\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42715328905277,"sku":null,"price":561.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/A16B-2201-0080_6.jpg?v=1763020440"},{"product_id":"a80ca800e-26f-mitsubishi-cpu-control-board-genuine-new-a80ca800e26f","title":"A80CA800E-26F Mitsubishi CPU Control Board Genuine New A80CA800E26F","description":"\u003cp\u003eThe A80CA800E-26F is a genuine Mitsubishi CPU control board engineered for precision industrial automation applications. This authentic component delivers reliable performance in programmable logic controller (PLC) systems and motion control environments. Built to Mitsubishi's exacting standards, it ensures seamless integration with compatible automation platforms and maintains consistent operational stability. Ideal for manufacturers requiring OEM-quality replacement parts or system upgrades, this new board guarantees compatibility and longevity in demanding industrial settings.\u003c\/p\u003e\n\u003cp\u003eProduct name: Mitsubishi CPU Control Board\u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: A80CA800E-26F\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42733822050365,"sku":null,"price":207.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/A80CA800E-26F_1_6f3fc9d7-bb10-4bd1-9769-799f0fe6a731.jpg?v=1769223027"},{"product_id":"20-750-enetr-new-in-box-ab-20-750-enetr-a-powerflex-750-2-p-ethernet-module","title":"20-750-ENETR New In Box 20-750-ENETR \/A 750 2-P EtherNet Module","description":"\u003ch2\u003e20-750-ENETR Ethernet Communication Module\u003c\/h2\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe 20-750-ENETR is an industrial Ethernet communication module designed to provide high-speed network connectivity between drives and automation systems. Supporting EtherNet\/IP communication, it enables real-time data exchange, remote monitoring, diagnostics, and system integration across industrial networks.\u003c\/p\u003e\n\u003cp\u003eIts dual-port design simplifies network architecture and helps reduce installation complexity in modern manufacturing environments.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e20-750-ENETR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eEthernet Communication Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Protocol\u003c\/td\u003e\n\u003ctd\u003eEtherNet\/IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEthernet Ports\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransmission Speed\u003c\/td\u003e\n\u003ctd\u003e10\/100 Mbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Topology\u003c\/td\u003e\n\u003ctd\u003eLinear, Star, Device Level Ring (DLR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eNetwork-Based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStatus Indicators\u003c\/td\u003e\n\u003ctd\u003eIntegrated LED Diagnostics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003ePlug-In Communication Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIndustrial automation networks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConveyor systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePackaging equipment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMaterial handling systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProcess control applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRemote drive monitoring\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFactory communication infrastructure\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cp\u003eThe module enables seamless communication between networked devices while supporting efficient diagnostics and control. Its dual-port capability allows flexible network configurations and helps reduce additional switching hardware requirements.\u003c\/p\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch3\u003e1. What is the primary purpose of the 20-750-ENETR?\u003c\/h3\u003e\n\u003cp\u003eIt provides Ethernet-based communication between compatible industrial devices and automation networks.\u003c\/p\u003e\n\u003ch3\u003e2. Which protocol does it support?\u003c\/h3\u003e\n\u003cp\u003eThe module supports EtherNet\/IP communication.\u003c\/p\u003e\n\u003ch3\u003e3. How many Ethernet ports are available?\u003c\/h3\u003e\n\u003cp\u003eIt features two RJ45 Ethernet ports.\u003c\/p\u003e\n\u003ch3\u003e4. Can it support network redundancy?\u003c\/h3\u003e\n\u003cp\u003eYes. It supports Device Level Ring (DLR) network architecture.\u003c\/p\u003e\n\u003ch3\u003e5. Is remote monitoring possible?\u003c\/h3\u003e\n\u003cp\u003eYes. The module enables remote diagnostics, monitoring, and data access over the network.\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42738024349757,"sku":null,"price":203.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/20-750-ENETR_1_f8fb0a76-cdbc-42f9-81cf-d6d07d6a879c.jpg?v=1769140487"},{"product_id":"rdcu-12c-genuine-abb-control-board-3aua0000036521d","title":"RDCU-12C Genuine ABB Control Board 3AUA0000036521D","description":"\u003ch2 data-start=\"174\" data-end=\"213\"\u003eRDCU-12C Genuine ABB Control Board\u003c\/h2\u003e\n\u003cp data-start=\"214\" data-end=\"246\"\u003e\u003cstrong data-start=\"214\" data-end=\"246\"\u003ePart Number: 3AUA0000036521D\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"248\" data-end=\"268\"\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eIn ACS800 Motor Drive applications analogue and digital I\/O channels are used for different functions such as control, monitoring and measurement purposes (e.g. motor temperature). To extend the I\/O functionality of your ACS800 Drive the RDCU-12C provides additional analogue and digital I\/O connections, relay outputs and more.\u003c\/p\u003e\n\u003cp\u003ePlease note that application software is not included, before the board can be used customers will need to obtain and install the required software.\u003c\/p\u003e\n\u003chr data-start=\"956\" data-end=\"959\"\u003e\n\u003ch3 data-start=\"961\" data-end=\"987\"\u003eKey Technical Features\u003c\/h3\u003e\n\u003cul data-start=\"989\" data-end=\"1337\"\u003e\n\u003cli data-start=\"989\" data-end=\"1040\"\u003e\n\u003cp data-start=\"991\" data-end=\"1040\"\u003e\u003cstrong data-start=\"991\" data-end=\"1040\"\u003eOriginal ABB Control Board – Factory Standard\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1041\" data-end=\"1082\"\u003e\n\u003cp data-start=\"1043\" data-end=\"1082\"\u003e\u003cstrong data-start=\"1043\" data-end=\"1082\"\u003eHigh-speed drive control processing\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1083\" data-end=\"1122\"\u003e\n\u003cp data-start=\"1085\" data-end=\"1122\"\u003e\u003cstrong data-start=\"1085\" data-end=\"1122\"\u003eStable real-time motor regulation\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1123\" data-end=\"1179\"\u003e\n\u003cp data-start=\"1125\" data-end=\"1179\"\u003e\u003cstrong data-start=\"1125\" data-end=\"1179\"\u003eMultiple I\/O and internal communication interfaces\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1180\" data-end=\"1229\"\u003e\n\u003cp data-start=\"1182\" data-end=\"1229\"\u003e\u003cstrong data-start=\"1182\" data-end=\"1229\"\u003eDesigned for ABB drive system compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1230\" data-end=\"1279\"\u003e\n\u003cp data-start=\"1232\" data-end=\"1279\"\u003e\u003cstrong data-start=\"1232\" data-end=\"1279\"\u003eIndustrial-grade PCB with long service life\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1280\" data-end=\"1337\"\u003e\n\u003cp data-start=\"1282\" data-end=\"1337\"\u003e\u003cstrong data-start=\"1282\" data-end=\"1337\"\u003eSupports continuous operation in harsh environments\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"1339\" data-end=\"1342\"\u003e\n\u003ch3 data-start=\"1344\" data-end=\"1372\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv class=\"TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"group TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable data-start=\"1374\" data-end=\"1878\" class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead data-start=\"1374\" data-end=\"1401\"\u003e\n\u003ctr data-start=\"1374\" data-end=\"1401\"\u003e\n\u003cth data-start=\"1374\" data-end=\"1386\" data-col-size=\"sm\"\u003eParameter\u003c\/th\u003e\n\u003cth data-start=\"1386\" data-end=\"1401\" data-col-size=\"md\"\u003eDescription\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody data-start=\"1427\" data-end=\"1878\"\u003e\n\u003ctr data-start=\"1427\" data-end=\"1464\"\u003e\n\u003ctd data-start=\"1427\" data-end=\"1442\" data-col-size=\"sm\"\u003eProduct Type\u003c\/td\u003e\n\u003ctd data-start=\"1442\" data-end=\"1464\" data-col-size=\"md\"\u003eDrive Control Unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1465\" data-end=\"1485\"\u003e\n\u003ctd data-start=\"1465\" data-end=\"1473\" data-col-size=\"sm\"\u003eModel\u003c\/td\u003e\n\u003ctd data-start=\"1473\" data-end=\"1485\" data-col-size=\"md\"\u003eRDCU-12C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1486\" data-end=\"1523\"\u003e\n\u003ctd data-start=\"1486\" data-end=\"1504\" data-col-size=\"sm\"\u003eABB Part Number\u003c\/td\u003e\n\u003ctd data-start=\"1504\" data-end=\"1523\" data-col-size=\"md\"\u003e3AUA0000036521D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1524\" data-end=\"1546\"\u003e\n\u003ctd data-start=\"1524\" data-end=\"1539\" data-col-size=\"sm\"\u003eManufacturer\u003c\/td\u003e\n\u003ctd data-start=\"1539\" data-end=\"1546\" data-col-size=\"md\"\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1547\" data-end=\"1599\"\u003e\n\u003ctd data-start=\"1547\" data-end=\"1558\" data-col-size=\"sm\"\u003eFunction\u003c\/td\u003e\n\u003ctd data-start=\"1558\" data-end=\"1599\" data-col-size=\"md\"\u003eMain control \u0026amp; logic processing board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1600\" data-end=\"1640\"\u003e\n\u003ctd data-start=\"1600\" data-end=\"1615\" data-col-size=\"sm\"\u003eControl Type\u003c\/td\u003e\n\u003ctd data-start=\"1615\" data-end=\"1640\" data-col-size=\"md\"\u003eDigital drive control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1641\" data-end=\"1683\"\u003e\n\u003ctd data-start=\"1641\" data-end=\"1652\" data-col-size=\"sm\"\u003eMounting\u003c\/td\u003e\n\u003ctd data-start=\"1652\" data-end=\"1683\" data-col-size=\"md\"\u003eInternal drive installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1684\" data-end=\"1726\"\u003e\n\u003ctd data-start=\"1684\" data-end=\"1700\" data-col-size=\"sm\"\u003eCommunication\u003c\/td\u003e\n\u003ctd data-start=\"1700\" data-end=\"1726\" data-col-size=\"md\"\u003eInternal ABB drive bus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1727\" data-end=\"1776\"\u003e\n\u003ctd data-start=\"1727\" data-end=\"1751\" data-col-size=\"sm\"\u003eOperating Environment\u003c\/td\u003e\n\u003ctd data-start=\"1751\" data-end=\"1776\" data-col-size=\"md\"\u003eIndustrial automation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1777\" data-end=\"1815\"\u003e\n\u003ctd data-start=\"1777\" data-end=\"1789\" data-col-size=\"sm\"\u003eCondition\u003c\/td\u003e\n\u003ctd data-start=\"1789\" data-end=\"1815\" data-col-size=\"md\"\u003eGenuine New \/ Original\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-start=\"1816\" data-end=\"1878\"\u003e\n\u003ctd data-start=\"1816\" data-end=\"1830\" data-col-size=\"sm\"\u003eApplication\u003c\/td\u003e\n\u003ctd data-start=\"1830\" data-end=\"1878\" data-col-size=\"md\"\u003eABB frequency drives \u0026amp; motor control systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003chr data-start=\"1880\" data-end=\"1883\"\u003e\n\u003ch3 data-start=\"1885\" data-end=\"1911\"\u003eFunctional Description\u003c\/h3\u003e\n\u003cp data-start=\"1913\" data-end=\"2006\"\u003eThe RDCU-12C functions as the \u003cstrong data-start=\"1943\" data-end=\"1968\"\u003ecentral control brain\u003c\/strong\u003e of the ABB drive system. It performs:\u003c\/p\u003e\n\u003cul data-start=\"2008\" data-end=\"2221\"\u003e\n\u003cli data-start=\"2008\" data-end=\"2045\"\u003e\n\u003cp data-start=\"2010\" data-end=\"2045\"\u003eMotor control algorithm execution\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2046\" data-end=\"2089\"\u003e\n\u003cp data-start=\"2048\" data-end=\"2089\"\u003eSpeed, torque, and direction regulation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2090\" data-end=\"2140\"\u003e\n\u003cp data-start=\"2092\" data-end=\"2140\"\u003eSignal processing from sensors and I\/O modules\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2141\" data-end=\"2177\"\u003e\n\u003cp data-start=\"2143\" data-end=\"2177\"\u003eDrive communication coordination\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2178\" data-end=\"2221\"\u003e\n\u003cp data-start=\"2180\" data-end=\"2221\"\u003eSystem diagnostics and fault management\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2223\" data-end=\"2389\"\u003eBy maintaining precise timing and stable signal output, the RDCU-12C guarantees \u003cstrong data-start=\"2303\" data-end=\"2388\"\u003eaccurate motor behavior, reduced vibration, and consistent production performance\u003c\/strong\u003e.\u003c\/p\u003e\n\u003chr data-start=\"2391\" data-end=\"2394\"\u003e\n\u003ch3 data-start=\"2396\" data-end=\"2420\"\u003eTypical Applications\u003c\/h3\u003e\n\u003cul data-start=\"2422\" data-end=\"2607\"\u003e\n\u003cli data-start=\"2422\" data-end=\"2437\"\u003e\n\u003cp data-start=\"2424\" data-end=\"2437\"\u003eABB AC Drives\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2438\" data-end=\"2470\"\u003e\n\u003cp data-start=\"2440\" data-end=\"2470\"\u003eIndustrial Frequency Inverters\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2471\" data-end=\"2495\"\u003e\n\u003cp data-start=\"2473\" data-end=\"2495\"\u003eMotor Control Cabinets\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2496\" data-end=\"2525\"\u003e\n\u003cp data-start=\"2498\" data-end=\"2525\"\u003eAutomation Production Lines\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2526\" data-end=\"2545\"\u003e\n\u003cp data-start=\"2528\" data-end=\"2545\"\u003eConveying Systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2546\" data-end=\"2574\"\u003e\n\u003cp data-start=\"2548\" data-end=\"2574\"\u003ePump \u0026amp; Fan Control Systems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2575\" data-end=\"2607\"\u003e\n\u003cp data-start=\"2577\" data-end=\"2607\"\u003eOEM Drive Repair \u0026amp; Replacement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2609\" data-end=\"2612\"\u003e\n\u003ch3 data-start=\"2614\" data-end=\"2658\"\u003eAdvantages for Maintenance \u0026amp; Replacement\u003c\/h3\u003e\n\u003cul data-start=\"2660\" data-end=\"2902\"\u003e\n\u003cli data-start=\"2660\" data-end=\"2712\"\u003e\n\u003cp data-start=\"2662\" data-end=\"2712\"\u003eDirect replacement for original RDCU-12C modules\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2713\" data-end=\"2777\"\u003e\n\u003cp data-start=\"2715\" data-end=\"2777\"\u003eNo programming required after installation (drive-dependent)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2778\" data-end=\"2823\"\u003e\n\u003cp data-start=\"2780\" data-end=\"2823\"\u003eRestores full drive functionality quickly\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2824\" data-end=\"2866\"\u003e\n\u003cp data-start=\"2826\" data-end=\"2866\"\u003eReduces downtime and maintenance costs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"2867\" data-end=\"2902\"\u003e\n\u003cp data-start=\"2869\" data-end=\"2902\"\u003eIdeal for spare parts inventory\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-start=\"2904\" data-end=\"2907\"\u003e\n\u003ch3 data-start=\"2909\" data-end=\"2955\"\u003eWhy Choose This RDCU-12C ABB Control Board\u003c\/h3\u003e\n\u003cp data-start=\"2957\" data-end=\"3183\"\u003e✔ Genuine ABB original product\u003cbr data-start=\"2987\" data-end=\"2990\"\u003e✔ Exact part number match: \u003cstrong data-start=\"3017\" data-end=\"3036\"\u003e3AUA0000036521D\u003c\/strong\u003e\u003cbr data-start=\"3036\" data-end=\"3039\"\u003e✔ High compatibility with ABB drive platforms\u003cbr data-start=\"3084\" data-end=\"3087\"\u003e✔ Stable long-term industrial operation\u003cbr data-start=\"3126\" data-end=\"3129\"\u003e✔ Suitable for global industrial automation projects\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/52ef241b-a08b-4c7a-b5ae-b35bd7595ca8.png?v=1769758929\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp data-start=\"3218\" data-end=\"3355\"\u003e \u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42758942720061,"sku":null,"price":1085.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/RDCU-12C_9_69ff76d7-a898-44e1-9066-2cd0e5ceac69.jpg?v=1768527567"},{"product_id":"a16b-1212-0901-fanuc-a16b12120901-new-original-control-board","title":"A16B-1212-0901 Fanuc A16B12120901 New Original control Board","description":"\u003ch2 data-section-id=\"kyjuiw\" data-start=\"626\" data-end=\"650\"\u003eProduct Description\u003c\/h2\u003e\n\u003cp data-start=\"652\" data-end=\"992\"\u003eThe \u003cstrong data-start=\"656\" data-end=\"733\"\u003eA16B-1212-0901 FANUC A16B12120901 New Original Power Supply Control Board\u003c\/strong\u003e is a rack-mounted power supply board designed for FANUC CNC control systems and industrial automation equipment. This board is used to provide stable power support inside the control rack, helping key system modules operate reliably during machine operation.\u003c\/p\u003e\n\u003cp data-start=\"994\" data-end=\"1322\"\u003eThe A16B-1212-0901 is commonly associated with FANUC 16MB, 16TB, 18MC, 18TC and selected robot controller applications. It is normally installed in the main control rack near the CPU and I\/O board, making it an important component for system power distribution and machine control stability.\u003cspan class=\"\" data-state=\"closed\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1324\" data-end=\"1624\"\u003eFor replacement work, the full part number \u003cstrong data-start=\"1367\" data-end=\"1385\"\u003eA16B-1212-0901\u003c\/strong\u003e and compact model code \u003cstrong data-start=\"1409\" data-end=\"1425\"\u003eA16B12120901\u003c\/strong\u003e should be checked carefully. The system series, rack position, input voltage, output requirements, connector layout and machine configuration should all match the original board before installation.\u003c\/p\u003e\n\u003ch2 data-section-id=\"tpkh8p\" data-start=\"1626\" data-end=\"1647\"\u003eKey Product Data\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eA16B-1212-0901\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompact Model Code\u003c\/td\u003e\n\u003ctd\u003eA16B12120901\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eFANUC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003ePower Supply Board \/ Power Supply Unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eA16B-1212 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommon System Use\u003c\/td\u003e\n\u003ctd\u003eFANUC CNC control systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommon Compatible Controls\u003c\/td\u003e\n\u003ctd\u003e16MB, 16TB, 18MC, 18TC and selected robot controllers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Position\u003c\/td\u003e\n\u003ctd\u003eMain control rack, near CPU and I\/O board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommon Input Reference\u003c\/td\u003e\n\u003ctd\u003e200V class \/ 200-240V class, depending on system configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eProvides power support for CNC control rack modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCondition\u003c\/td\u003e\n\u003ctd\u003eNew Original\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003csection class=\"text-token-text-primary w-full focus:outline-none [--shadow-height:45px] has-data-writing-block:pointer-events-none has-data-writing-block:-mt-(--shadow-height) has-data-writing-block:pt-(--shadow-height) [\u0026amp;:has([data-writing-block])\u0026gt;*]:pointer-events-auto [content-visibility:auto] supports-[content-visibility:auto]:[contain-intrinsic-size:auto_100lvh] R6Vx5W_threadScrollVars scroll-mb-[calc(var(--scroll-root-safe-area-inset-bottom,0px)+var(--thread-response-height))] scroll-mt-[calc(var(--header-height)+min(200px,max(70px,20svh)))]\" dir=\"auto\" data-turn-id=\"request-69eec384-3004-83ea-8bfc-f944e3a9ec68-5\" data-testid=\"conversation-turn-14\" data-scroll-anchor=\"false\" data-turn=\"assistant\"\u003e\n\u003cdiv class=\"text-base my-auto mx-auto pb-10 [--thread-content-margin:var(--thread-content-margin-xs,calc(var(--spacing)*4))] @w-sm\/main:[--thread-content-margin:var(--thread-content-margin-sm,calc(var(--spacing)*6))] @w-lg\/main:[--thread-content-margin:var(--thread-content-margin-lg,calc(var(--spacing)*16))] px-(--thread-content-margin)\"\u003e\n\u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\"\u003e\n\u003cdiv class=\"flex max-w-full flex-col gap-4 grow\"\u003e\n\u003cdiv data-message-author-role=\"assistant\" data-message-id=\"90eca377-ab16-42c0-a993-66ac50ce38a4\" dir=\"auto\" data-message-model-slug=\"gpt-5-5-thinking\" class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal outline-none keyboard-focused:focus-ring [.text-message+\u0026amp;]:mt-1\" data-turn-start-message=\"true\" tabindex=\"0\"\u003e\n\u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden\"\u003e\n\u003cdiv class=\"markdown prose dark:prose-invert w-full wrap-break-word light markdown-new-styling\"\u003e\n\u003ch2 data-section-id=\"18p0o4p\" data-start=\"2247\" data-end=\"2265\"\u003eMain Features\u003c\/h2\u003e\n\u003ch3 data-section-id=\"10l9suk\" data-start=\"2267\" data-end=\"2316\"\u003eDesigned for CNC Control Rack Power Support\u003c\/h3\u003e\n\u003cp data-start=\"2317\" data-end=\"2432\"\u003eThe A16B-1212-0901 is used inside CNC control systems to support stable power delivery to key rack-mounted modules.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1k3su0x\" data-start=\"2434\" data-end=\"2482\"\u003eSuitable for System Repair and Replacement\u003c\/h3\u003e\n\u003cp data-start=\"2483\" data-end=\"2670\"\u003eThis board is a practical replacement option when the original power supply board has failure symptoms such as unstable startup, power alarm, missing output, or control rack power issues.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1nue8no\" data-start=\"2672\" data-end=\"2703\"\u003eRack-Mounted Board Design\u003c\/h3\u003e\n\u003cp data-start=\"2704\" data-end=\"2902\"\u003eThe board is designed for installation in the control rack, normally close to the CPU and I\/O board, so the connector layout and installation position should be checked carefully before replacement.\u003c\/p\u003e\n\u003ch3 data-section-id=\"3fuj7g\" data-start=\"2904\" data-end=\"2949\"\u003eImportant for Machine Control Stability\u003c\/h3\u003e\n\u003cp data-start=\"2950\" data-end=\"3110\"\u003eA stable power supply board helps the CNC control system maintain reliable operation, reducing the risk of control faults caused by unstable power distribution.\u003c\/p\u003e\n\u003ch3 data-section-id=\"1bka1r4\" data-start=\"3112\" data-end=\"3146\"\u003eFull Model Matching Required\u003c\/h3\u003e\n\u003cp data-start=\"3147\" data-end=\"3307\"\u003eBecause FANUC boards may look similar across different series, the full model number \u003cstrong data-start=\"3232\" data-end=\"3250\"\u003eA16B-1212-0901\u003c\/strong\u003e should be matched instead of relying only on appearance.\u003c\/p\u003e\n\u003ch2 data-section-id=\"uujcgr\" data-start=\"3309\" data-end=\"3331\"\u003eApplication Areas\u003c\/h2\u003e\n\u003cul data-start=\"3333\" data-end=\"3616\"\u003e\n\u003cli data-section-id=\"11vkqvm\" data-start=\"3333\" data-end=\"3364\"\u003eCNC machine control systems\u003c\/li\u003e\n\u003cli data-section-id=\"1jflc5e\" data-start=\"3365\" data-end=\"3403\"\u003eFANUC 16 \/ 18 series control racks\u003c\/li\u003e\n\u003cli data-section-id=\"5sqhsd\" data-start=\"3404\" data-end=\"3436\"\u003eRobot controller maintenance\u003c\/li\u003e\n\u003cli data-section-id=\"11hbk5i\" data-start=\"3437\" data-end=\"3471\"\u003eMachine tool electrical repair\u003c\/li\u003e\n\u003cli data-section-id=\"xuq9pw\" data-start=\"3472\" data-end=\"3504\"\u003eCNC power supply replacement\u003c\/li\u003e\n\u003cli data-section-id=\"1jm24kn\" data-start=\"3505\" data-end=\"3548\"\u003eIndustrial automation equipment service\u003c\/li\u003e\n\u003cli data-section-id=\"vf67fl\" data-start=\"3549\" data-end=\"3584\"\u003eControl cabinet troubleshooting\u003c\/li\u003e\n\u003cli data-section-id=\"39kqg\" data-start=\"3585\" data-end=\"3616\"\u003eProduction line maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2 data-section-id=\"llbdrn\" data-start=\"3618\" data-end=\"3646\"\u003eWhy Choose This Product\u003c\/h2\u003e\n\u003cp data-start=\"3648\" data-end=\"3900\"\u003eThe \u003cstrong data-start=\"3652\" data-end=\"3670\"\u003eA16B-1212-0901\u003c\/strong\u003e is suitable for maintenance projects where the original CNC power supply board must be replaced with the same model. It helps restore power stability in the control rack and supports normal operation of connected control modules.\u003c\/p\u003e\n\u003cp data-start=\"3902\" data-end=\"4150\"\u003eBefore ordering or installation, confirm the machine model, CNC system series, rack location, connector position, input voltage, output voltage and board revision. These checks help reduce mismatch problems and make maintenance work more efficient.\u003c\/p\u003e\n\u003ch2 data-section-id=\"x9bttf\" data-start=\"4152\" data-end=\"4160\"\u003eFAQ\u003c\/h2\u003e\n\u003cp data-start=\"4162\" data-end=\"4300\"\u003e\u003cstrong data-start=\"4162\" data-end=\"4207\"\u003eQ1: What type of board is A16B-1212-0901?\u003c\/strong\u003e\u003cbr data-start=\"4207\" data-end=\"4210\"\u003eA1: It is a FANUC power supply board \/ power supply unit used in CNC control rack systems.\u003c\/p\u003e\n\u003cp data-start=\"4302\" data-end=\"4498\"\u003e\u003cstrong data-start=\"4302\" data-end=\"4353\"\u003eQ2: Is A16B12120901 the same as A16B-1212-0901?\u003c\/strong\u003e\u003cbr data-start=\"4353\" data-end=\"4356\"\u003eA2: Yes. A16B12120901 is the compact writing format of A16B-1212-0901. The full printed model code should still be checked on the board label.\u003c\/p\u003e\n\u003cp data-start=\"4500\" data-end=\"4636\"\u003e\u003cstrong data-start=\"4500\" data-end=\"4538\"\u003eQ3: Where is this board installed?\u003c\/strong\u003e\u003cbr data-start=\"4538\" data-end=\"4541\"\u003eA3: It is normally installed in the main CNC control rack, commonly near the CPU and I\/O board.\u003c\/p\u003e\n\u003cp data-start=\"4638\" data-end=\"4840\"\u003e\u003cstrong data-start=\"4638\" data-end=\"4697\"\u003eQ4: What should be checked before replacing this board?\u003c\/strong\u003e\u003cbr data-start=\"4697\" data-end=\"4700\"\u003eA4: Check the full part number, CNC control series, input voltage, output requirements, connector layout, rack position and board condition.\u003c\/p\u003e\n\u003cp data-start=\"4842\" data-end=\"5070\"\u003e\u003cstrong data-start=\"4842\" data-end=\"4897\"\u003eQ5: What problems may require replacing this board?\u003c\/strong\u003e\u003cbr data-start=\"4897\" data-end=\"4900\"\u003eA5: Replacement may be considered when the machine has control rack power failure, unstable startup, missing power output, repeated power alarms, or visible board damage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"z-0 flex min-h-[46px] justify-start\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"mt-3 w-full empty:hidden\"\u003e\n\u003cdiv class=\"text-center\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42767306522685,"sku":null,"price":596.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/A16B-1212-0901_10.jpg?v=1768361463"},{"product_id":"a16b-1212-0471-fanuc-pcb-power-supply-board-a16b12120471-new-sealed","title":"A16B-1212-0471 Fanuc PCB Power Supply Board A16B12120471 New Sealed","description":"\u003cp\u003eA16B-1212-0471 Fanuc PCB Power Supply Board delivers reliable power distribution for Fanuc industrial automation systems. This sealed, new component ensures optimal performance in CNC machines, robots, and manufacturing equipment. Built to Fanuc's exacting standards, it provides stable voltage regulation and protection against electrical fluctuations. Ideal for system upgrades, replacements, or maintenance applications requiring genuine OEM-quality components. Factory-sealed condition guarantees integrity and longevity in demanding industrial environments.\u003c\/p\u003e\n\u003cp\u003eProduct name: Fanuc PCB Power Supply Board\u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: A16B-1212-0471\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42767346139197,"sku":null,"price":540.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/A16B-1212-0471_11_6b1ed530-633f-49e5-b343-98aa37471284.jpg?v=1768361361"},{"product_id":"6sn1121-0ba13-0aa0-new-original-siemens-control-module-6sn11210ba130aa0","title":"6SN1121-0BA13-0AA0 New Original Siemens Control Module 6SN11210BA130AA0","description":"\u003cp\u003eThe Siemens 6SN1121-0BA13-0AA0 is a precision control module engineered for industrial automation systems. This original component delivers reliable performance in motion control applications, featuring Siemens' proven engineering standards. Designed for seamless integration into existing drive systems, it ensures stable operation and precise command execution. Ideal for manufacturers requiring dependable control solutions, this module combines robust construction with advanced functionality. Trust in Siemens quality for your critical automation infrastructure.\u003c\/p\u003e\n\u003cp\u003eProduct name: Siemens Control Module\u003c\/p\u003e\n\u003cp\u003eCondition: New Original\u003c\/p\u003e\n\u003cp\u003eWarranty: One year\u003c\/p\u003e\n\u003cp\u003eModel NO: 6SN1121-0BA13-0AA0\u003c\/p\u003e\n\u003cp\u003eLead time: In stock\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42776560894013,"sku":null,"price":949.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/6SN1121-0BA13-0AA0_14_f5c82ddd-89e0-44af-8ee8-c43dd586f53b.jpg?v=1768355206"}],"url":"https:\/\/topsdevice.com\/collections\/pcb-control-board.oembed?page=2","provider":"topsdevice","version":"1.0","type":"link"}