{"product_id":"7mf1567-3de00-3ga1-siemens-7mf15673bd001ca1-sitrans-transmitter-new-sealed","title":"7MF1567-3DE00-3GA1 Siemens 7MF15673BD001CA1 Sitrans Transmitter New sealed","description":"\u003ch2 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eSiemens 7MF1567-3DE00-3GA1 — SITRANS P320 Gauge Pressure Transmitter | 0–400 bar | 4–20mA HART | New Sealed\u003c\/h2\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePressure measurement sounds straightforward until you're specifying for a high-pressure hydraulic system, a compressor station, or a refrigeration circuit running R-134a. At that point, details like process connection thread, pressure range, output protocol, and ingress protection start to matter a great deal — and getting them wrong means a transmitter that doesn't fit, doesn't reach, or doesn't communicate.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe \u003cstrong\u003e7MF1567-3DE00-3GA1\u003c\/strong\u003e is a Siemens \u003cstrong\u003eSITRANS P320\u003c\/strong\u003e series gauge pressure transmitter configured for \u003cstrong\u003e0 to 400 bar\u003c\/strong\u003e measurement range with \u003cstrong\u003e4–20mA + HART\u003c\/strong\u003e output. It's a robust, compact unit designed for demanding industrial process environments where moderate-to-high line pressures need continuous monitoring and integration into a DCS, SCADA, or PLC system.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e✅ \u003cstrong\u003eNew sealed. Genuine Siemens. CE certified. Ships worldwide.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eOrder Number Decoded — 7MF1567-3DE00-3GA1\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe 16-character Siemens SITRANS P order number contains the complete technical specification of the transmitter. Here's what each section means:\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003e7MF1567\u003c\/strong\u003e — SITRANS P320 series base number. The P320 is a compact gauge pressure transmitter with a welded stainless steel sensing element, suitable for industrial process and utility applications.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003e-3\u003c\/strong\u003e — Stainless steel process connection (1.4404 \/ 316L equivalent). This is the standard wetted material specification for process compatibility with a wide range of fluids.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eD\u003c\/strong\u003e — Measuring range code. \"D\" in the SITRANS P320 numbering corresponds to the higher pressure ranges — the 0–400 bar range puts this firmly in the high-pressure segment, suitable for hydraulic systems, compressors, and high-pressure process lines.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eE\u003c\/strong\u003e — Measurement type: gauge pressure (relative to atmosphere). Not absolute pressure. The transmitter measures pressure above ambient — a reading of zero means the process pressure equals atmospheric pressure.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003e00\u003c\/strong\u003e — No display, standard housing. No local indicator is included in this configuration.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003e-3GA1\u003c\/strong\u003e — Communication and output suffix: \u003cstrong\u003e3G = 4–20mA with HART (two-wire)\u003c\/strong\u003e, \u003cstrong\u003eA1 = standard cable entry \/ M20 cable gland entry\u003c\/strong\u003e. HART communication allows configuration, diagnostics, and parameter readback over the same two-wire 4–20mA loop without additional wiring.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eParameter\u003c\/th\u003e\n\u003cth scope=\"col\" class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOrder Number\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e7MF1567-3DE00-3GA1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eProduct Series\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eSiemens SITRANS P320\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMeasurement Type\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\n\u003cstrong\u003eGauge Pressure\u003c\/strong\u003e (relative to atmosphere)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMeasuring Range\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003e0 to 400 bar\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOverload Pressure\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e600 bar (1.5× MWP — do not exceed in installation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOutput Signal\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003e4–20mA (2-wire) + HART protocol\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e10.5–45V DC (2-wire loop powered)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eAccuracy\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e±0.1% of span (reference conditions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eLong-Term Stability\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u0026lt; 0.1% per year\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eWetted Parts Material\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eStainless steel 1.4404 (316L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eProcess Connection\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eG1\/2\" male (DIN 3852) — verify at installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eElectrical Connection\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eM20 × 1.5 cable entry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eAmbient Temperature\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e–40°C to +85°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eProcess Temperature\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e–40°C to +100°C (standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eProtection Rating\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\n\u003cstrong\u003eIP65\u003c\/strong\u003e (dust-tight, jet-water resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eExplosion Protection\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eNot in this configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCertifications\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCE, RoHS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCondition\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eNew Sealed \/ Factory Sealed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eGauge vs Absolute Pressure — Making Sure You Order the Right Type\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe \"-E\" in the order number (gauge pressure) is one of the most commonly confused specifications when ordering pressure transmitters. Here's the practical distinction:\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eGauge pressure (this unit)\u003c\/strong\u003e measures pressure relative to the local atmosphere. A process running at 10 bar gauge is 10 bar above ambient. If atmospheric pressure changes, the zero reference changes with it. Most industrial process applications — hydraulics, pneumatics, compressed air, pump discharge — use gauge pressure measurement because what matters is the differential above atmosphere, not the absolute value.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eAbsolute pressure\u003c\/strong\u003e measures pressure relative to a perfect vacuum. 1 bar absolute equals approximately atmospheric pressure at sea level. Absolute transmitters are needed when atmospheric pressure variation matters to the measurement — vacuum systems, altitude-sensitive applications, or processes where absolute gas pressure is the relevant process variable.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eIf you're replacing an existing transmitter, match the measurement type of the original. Swapping a gauge transmitter for an absolute one on a process where gauge pressure is the control variable will give readings offset by approximately 1 bar — enough to cause serious process control problems.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eHART Communication — What It Gives You in Practice\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe HART (Highway Addressable Remote Transducer) protocol built into the 7MF1567-3DE00-3GA1 is often underutilized because field technicians default to using only the 4–20mA analog signal. That's leaving value on the table. Over the same two-wire connection, HART provides:\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eRemote configuration\u003c\/strong\u003e — zero and span calibration, measuring range adjustment, damping time constant, engineering units, and tag name can all be changed from a HART communicator or PC tool without visiting the field device. For transmitters in hazardous areas or physically inaccessible locations, this is a real maintenance advantage.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eDiagnostics\u003c\/strong\u003e — the transmitter transmits diagnostic information including sensor temperature, output current, loop integrity check, and internal error flags. A HART-capable DCS (like Siemens PCS 7, Yokogawa CENTUM, or Emerson DeltaV) can monitor these values continuously and alert operators to transmitter health issues before a failure occurs.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eMultivariable output\u003c\/strong\u003e — in HART multidrop configurations (multiple transmitters on one loop, all at 4mA, communication via HART only), a single pair of wires can carry data from multiple transmitters — useful in tight cable tray situations with dense instrument clusters.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eInstallation Considerations for 400 Bar Service\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eAt 400 bar (5,800 psi), this isn't a utility instrument — it's a high-pressure process transmitter that requires proper installation practice:\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eImpulse line sizing matters at high pressure. Use tubing rated for at least 1.5× the maximum working pressure — for 400 bar service, 600 bar rated tube is the standard minimum. Use compression fittings (Swagelok or equivalent) appropriate for the pressure rating; do not use NPT threads in push-to-connect fittings.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe process connection thread on the 7MF1567-3DE00-3GA1 is G1\/2\" (BSP parallel thread per DIN 3852). Confirm your tapping point thread standard before installation. G1\/2\" requires a sealing face on the port — it does not self-seal on the thread like NPT. Use a copper or aluminum sealing washer in the G1\/2\" port, and confirm the port face is clean and undamaged before torquing.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eFor vibrating installations (compressors, pump headers), consider a close-coupled root valve that allows transmitter isolation without process shutdown, and remote-seal diaphragm arrangements if pulsation could damage the sensor.\u003c\/p\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003ch4 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003e❓ FAQ — Siemens 7MF1567-3DE00-3GA1\u003c\/h4\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ1: What is the exact measuring range of this transmitter?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThis transmitter is configured for \u003cstrong\u003e0 to 400 bar gauge pressure\u003c\/strong\u003e. The maximum overload pressure (the pressure above which permanent sensor damage may occur) is 600 bar — 1.5 times the measuring range upper limit. Never exceed the overload pressure rating during pressure testing or surge events in the process.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ2: What does the \"-3GA1\" suffix mean — can I order a version with a local display instead?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e The \"-3GA1\" suffix specifies no local display and M20 cable entry. Siemens offers a version of the SITRANS P320 with an integrated LCD display (showing the current measured value in engineering units) by changing the suffix — look for configurations containing \"DA\" in the display position of the order number. If your process location requires local reading without a HART communicator, order the display-equipped version. The display also shows diagnostic information and allows basic parameter changes via front-panel buttons.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ3: Is HART communication standard on this unit, or an option?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe \"-3G\" output designation in the order number confirms that \u003cstrong\u003eHART is included as standard\u003c\/strong\u003e in this configuration — it's not an add-on option. The 4–20mA signal and HART digital communication both operate simultaneously over the same two-wire connection. No additional hardware is needed for HART communication; you just need a HART communicator (like an Emerson 475 or Beamex) or a HART modem connected to the loop.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ4: What process fluids is this transmitter compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e The wetted parts (the parts in contact with the process fluid) are stainless steel 1.4404 (equivalent to 316L). This material is compatible with a broad range of fluids including water, steam (within temperature limits), hydraulic oil, many hydrocarbons, and common process chemicals. It is not suitable for highly concentrated acids, chlorine-containing fluids, or specific chemical services — for aggressive media, SITRANS P variants with Hastelloy or ceramic sensing elements are available. Always verify chemical compatibility for your specific process fluid before installation.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ5: How do I configure the 4–20mA output range using a HART communicator?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eConnect a HART communicator (or HART modem with PC software like Siemens SIMATIC PDM) to the loop while the transmitter is powered. Navigate to the configuration menu and set the Lower Range Value (LRV = 0 bar → 4mA) and Upper Range Value (URV = 400 bar → 20mA). You can also adjust output damping (response time filtering), set a failsafe output current (3.6mA or 22mA on fault), and configure the engineering units displayed. All changes are saved in non-volatile memory inside the transmitter.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ6: What is the difference between SITRANS P220, P320, and P500?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e These are different product lines within Siemens' SITRANS P family, aimed at different application tiers. The \u003cstrong\u003eP220\u003c\/strong\u003e (older series, 7MF4) is a basic 4–20mA transmitter with limited HART capability, suitable for standard process monitoring. The \u003cstrong\u003eP320\u003c\/strong\u003e (this unit, 7MF1567) is the current mid-range offering with full HART, better accuracy (±0.1% of span), and wider ambient temperature range — it replaced the P220 as the standard industrial choice. The \u003cstrong\u003eP500\u003c\/strong\u003e (7MF4 high-end) adds Foundation Fieldbus and PROFIBUS PA communication options, Bluetooth configuration capability, and enhanced diagnostics for premium process applications. For standard industrial process monitoring with 4–20mA DCS integration, the P320 is the practical choice.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ7: Can I use this transmitter in a hazardous area (Ex zone)?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThis specific configuration (7MF1567-3DE00-3GA1) does not include explosion protection certification — it is suitable for non-hazardous (safe area) installations only. SITRANS P320 transmitters are available with ATEX, IECEx, and FM hazardous area certifications, but those require specific order number suffixes indicating the Ex approval type (e.g., Ex ia, Ex d). If your installation is in a classified hazardous area (Zone 1, Zone 2, Division 1\/2), you must specify and order the appropriate Ex-certified variant. Never install a non-Ex transmitter in a classified hazardous area regardless of application pressure.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/7MF1567-3DE00-3GA1_1_800x800_bbc9e3ce-29f2-4e6f-8f79-03a4f6979cf6.jpg?v=1772781072\" alt=\"\"\u003e\u003c\/p\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42782137745469,"sku":null,"price":124.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/7MF1567-3DE00-3GA1.jpg?v=1773720977","url":"https:\/\/topsdevice.com\/products\/7mf1567-3de00-3ga1-siemens-7mf15673bd001ca1-sitrans-transmitter-new-sealed","provider":"topsdevice","version":"1.0","type":"link"}