{"product_id":"a05b-2255-c105-eaw-genuine-a05b2255c105-eaw-fanuc-touch-screen-glass-panel-lcd-display","title":"A05B-2255-C105#EAW Genuine A05B2255C105#EAW Fanuc Touch Screen Glass PANEL+LCD Display","description":"\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch2 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eFanuc A05B-2255-C105#EAW — Touch Screen Glass Panel + LCD Display Assembly for Series 30i \/ 31i \/ 0i-D\/F | Genuine New OEM\u003c\/h2\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eWhen a CNC machine's operator panel display goes dark, or the touch response starts drifting and missing inputs, production stops — and it usually stays stopped until the right panel assembly arrives. The \u003cstrong\u003eFanuc A05B-2255-C105#EAW\u003c\/strong\u003e is the complete touch screen and LCD assembly used in Fanuc's \u003cstrong\u003eSeries 30i, 31i, 32i, and 0i-D\/F\u003c\/strong\u003e CNC operator panels. It's not a generic aftermarket part — it's a \u003cstrong\u003egenuine Fanuc OEM unit\u003c\/strong\u003e supplied as the combined touch glass overlay and LCD module, tested to Fanuc's specifications and ready for direct installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eAt $1,925, this is not a cheap component. That price reflects exactly what it is: a genuine Fanuc part for a machine control system where the alternative — non-genuine or incompatible panels — can cause persistent touch calibration failures, display artifacts, or outright incompatibility with the CNC's display controller board. On a machine that produces revenue every hour it runs, the cost of downtime from a bad panel swap far exceeds the difference between OEM and aftermarket.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e✅ \u003cstrong\u003eGenuine Fanuc OEM. Brand new factory sealed. Ships worldwide.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\n\u003cstrong\u003eWhat the Part Number Tells You\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003eA05B  -  2255  -  C  1  0  5  #  E  A  W\u003cbr\u003e│         │          │  │  │  │    │  │  └── W: White LED backlight\u003cbr\u003e│         │          │  │  │  │    │  └───── A: English language \/ ASCII character set\u003cbr\u003e│         │          │  │  │  │    └──────── E: Export version (outside Japan)\u003cbr\u003e│         │          │  │  │  └──────────── 5: Product variant \/ configuration\u003cbr\u003e│         │          │  │  └─────────────── 0: Series generation indicator\u003cbr\u003e│         │          │  └───────────────────1: Size\/type within C group\u003cbr\u003e│         │          └────────────────────── C: Complete panel assembly (glass + LCD combined)\u003cbr\u003e│         └─────────────────────────────── 2255: Fanuc Series 30i\/31i\/0i-D\/F operator panel platform\u003cbr\u003e└───────────────────────────────────────── A05B: Fanuc peripheral\/operator interface category\u003c\/div\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe \u003cstrong\u003e#EAW suffix\u003c\/strong\u003e is important for ordering accuracy. \"E\" confirms this is the \u003cstrong\u003einternational\/export version\u003c\/strong\u003e rather than the Japan-domestic unit. \"A\" means the display and system interface operates with \u003cstrong\u003eEnglish (ASCII) character encoding\u003c\/strong\u003e — relevant when the machine's CNC software is configured for English. \"W\" designates the \u003cstrong\u003ewhite LED backlight\u003c\/strong\u003e type. If your machine uses a different language panel or an older CCFL-backlit variant, the suffix will differ, and ordering the wrong suffix can result in a panel that physically fits but doesn't integrate correctly with the CNC's display controller.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eCompatible CNC Systems\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe A05B-2255 series operator panel platform is used across several Fanuc CNC generations:\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\" scope=\"col\"\u003eCNC Series\u003c\/th\u003e\n\u003cth class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\" scope=\"col\"\u003eTypical Machine Type\u003c\/th\u003e\n\u003cth class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\" scope=\"col\"\u003ePanel Use\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eFanuc Series 30i-A \/ 30i-B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eHigh-speed 5-axis machining centers\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eFull operator station display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eFanuc Series 31i-A \/ 31i-B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eTurning centers, grinding machines\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOperator panel primary display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eFanuc Series 32i-B\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCompact CNC machining applications\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOperator interface display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eFanuc 0i-D\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eGeneral-purpose CNC lathes, mills\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eMain HMI touch panel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\u003cstrong\u003eFanuc 0i-F \/ 0i-F Plus\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCurrent-generation 0i machines\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOperator panel display\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cblockquote class=\"ml-2 border-l-4 border-border-300\/10 pl-4 text-text-300\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eNote on cross-compatibility:\u003c\/strong\u003e While the physical dimensions and connector may match across variants, always verify your existing panel's part number before ordering. The suffix characters (#EAW vs #JAW for Japanese domestic, for example) and the C-group number (C101, C102, C105) indicate different hardware revisions with potentially different electrical interfaces. Installing an incompatible variant can result in display errors even if the panel physically seats correctly.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eTechnical Specifications\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cdiv class=\"overflow-x-auto w-full px-2 mb-6\"\u003e\n\u003ctable class=\"min-w-full border-collapse text-sm leading-[1.7] whitespace-normal\"\u003e\n\u003cthead class=\"text-left\"\u003e\n\u003ctr\u003e\n\u003cth class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\" scope=\"col\"\u003eParameter\u003c\/th\u003e\n\u003cth class=\"text-text-100 border-b-0.5 border-border-300\/60 py-2 pr-4 align-top font-bold\" scope=\"col\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eManufacturer\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eFanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003ePart Number\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eA05B-2255-C105#EAW\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eAssembly Type\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCombined touch glass panel + LCD display module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eTouch Technology\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\n\u003cstrong\u003eResistive (single-point)\u003c\/strong\u003e — stylus or gloved hand compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eDisplay Technology\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eTFT LCD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eResolution\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e640 × 480 (VGA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eBacklight Type\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e\n\u003cstrong\u003eLED\u003c\/strong\u003e (White — \"W\" suffix)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eBacklight Life\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eSignificantly longer than CCFL predecessors (no mercury, no degrading gas)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eColor Depth\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e256 colors (Fanuc CNC UI standard)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eViewing Angle\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eApprox. 120° horizontal \/ vertical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eLanguage \/ Encoding\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eEnglish \/ ASCII (#A suffix)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eVersion\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eExport\/international (#E suffix)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e0°C to +50°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003e–20°C to +60°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCompatible CNC\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eFanuc Series 30i, 31i, 32i, 0i-D, 0i-F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eCondition\u003c\/td\u003e\n\u003ctd class=\"border-b-0.5 border-border-300\/30 py-2 pr-4 align-top\"\u003eGenuine New \/ Factory Sealed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eResistive Touch Technology in CNC Environments\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eWorth explaining for engineers specifying this panel: \u003cstrong\u003eCNC operator panels use resistive touch screens\u003c\/strong\u003e, not capacitive. This is a deliberate design choice, not a cost-cutting measure. Here's why it matters in a machine shop environment:\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eResistive touch responds to \u003cstrong\u003ephysical pressure\u003c\/strong\u003e rather than electrical capacitance. That means it works equally well whether the operator is using a bare fingertip, a gloved hand, a stylus, or even the eraser end of a pencil. In a machine shop — where operators routinely wear cut-resistant or chemical-resistant gloves — a capacitive screen simply wouldn't respond to most touches. Resistive also works perfectly with coolant-contaminated or oil-covered hands, which is a daily reality on turning and machining center operations.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe tradeoff is that resistive screens are single-point (no multi-touch gestures) and can require periodic recalibration if the overlay ages or is damaged. That's what this replacement part addresses: when the touch response drifts, the overlay surface is scratched beyond acceptance, or the combined assembly has failed, the A05B-2255-C105#EAW replaces the entire touch + display stack as a single unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eGlass Panel Only vs Full Assembly — Which Do You Need?\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eFanuc touch screen replacements come in two forms, and ordering the wrong one is a costly mistake:\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eTouch glass panel only\u003c\/strong\u003e — just the resistive overlay, no LCD. Used when the LCD is still functioning correctly but the touch glass is cracked, scratched, or has dead zones. Lower cost, but requires careful separation of the existing overlay from the LCD (risk of damaging the LCD during disassembly).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eCombined touch glass + LCD assembly (this unit, A05B-2255-C105#EAW)\u003c\/strong\u003e — the complete display stack. Used when both the LCD and touch are replaced together, when the LCD has failed (backlight dead, display artifacts, lines across the screen), or when the panel is being completely refurbished. Higher cost, but clean installation with no risk from disassembly of the existing unit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe \u003cstrong\u003e#EAW\u003c\/strong\u003e part number ending in \"-C105\" indicates this is the \u003cstrong\u003ecomplete combined assembly\u003c\/strong\u003e — not just the glass. If you only need the touch glass, that would be a different part number. Confirm which component has actually failed before ordering to avoid purchasing the full assembly when only the overlay is needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003eDiagnosing Your Fanuc Panel Before Ordering\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eBefore committing to a replacement, it's worth spending 10 minutes on diagnosis. Common failure modes and their indicators:\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eTouch response only — LCD still clear:\u003c\/strong\u003e The touch glass overlay has failed (digitizer dead zones, drift, no response). The LCD backlight and image are fine. You may be able to replace the touch glass only rather than the full assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eBacklight dead — display visible in direct light:\u003c\/strong\u003e The LED backlight has failed. The LCD panel itself may still be functioning. This is a full assembly failure on LED-backlit units since the backlight is integrated.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eDisplay artifacts, lines, color shift:\u003c\/strong\u003e LCD panel failure. Full assembly replacement required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eIntermittent display — sometimes works, sometimes blank:\u003c\/strong\u003e Often a connector or cable issue rather than the panel itself. Check the display cable connection at the back of the panel and at the CNC display controller board before ordering a replacement panel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eTouch and display both failed after impact:\u003c\/strong\u003e Physical damage — full assembly replacement is the correct path.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch3 class=\"text-text-100 mt-2 -mb-1 text-base font-bold\"\u003e📦 Procurement \u0026amp; Shipping\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e🔒 Genuine Fanuc OEM — factory sealed, full part number label verification\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e✅ Brand new — not refurbished, not repaired, not a pulled surplus unit\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e📦 Original protective packaging — display panels are fragile in transit without correct foam packing\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e🌍 Worldwide express shipping (DHL \/ FedEx \/ UPS)\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words pl-2\"\u003e⚡ In stock — dispatches within 1–2 business days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003chr class=\"border-border-200 border-t-0.5 my-3 mx-1.5\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003ch4 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003e❓ FAQ — Fanuc A05B-2255-C105#EAW Touch Screen + LCD Display\u003c\/h4\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ1: Which specific Fanuc CNC series is the A05B-2255-C105#EAW compatible with?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe A05B-2255 operator panel platform is used with \u003cstrong\u003eFanuc Series 30i-A\/B, 31i-A\/B, 32i-B, 0i-D, and 0i-F\/F Plus\u003c\/strong\u003e CNC systems. These cover a wide range of machine types including vertical and horizontal machining centers, CNC turning centers, grinding machines, and general-purpose mills and lathes. To confirm compatibility with your specific machine, check the part number label on the existing panel — it should match A05B-2255-C105#EAW exactly, including the suffix. If the existing panel has a different C-number (C101, C102, etc.) or a different suffix, verify with the machine manufacturer or Fanuc service documentation before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ2: What does the #EAW suffix mean — will a panel with a different suffix work on my machine?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe suffix encodes three characteristics: \u003cstrong\u003eE = export\/international version\u003c\/strong\u003e (not Japan domestic), \u003cstrong\u003eA = English\/ASCII language encoding\u003c\/strong\u003e, \u003cstrong\u003eW = white LED backlight\u003c\/strong\u003e. A panel with a different suffix — for example #JAW (Japanese domestic) or #EAB (different backlight type) — may physically fit into the panel housing but can cause issues ranging from incorrect character display to electrical incompatibility with the display controller. For replacement purposes, the suffix should match the original panel exactly unless you have confirmed from Fanuc service documentation that a specific cross-reference is acceptable. When in doubt, match the full part number including suffix.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ3: Is this the complete panel assembly or just the touch glass overlay?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe A05B-2255-C105#EAW is the \u003cstrong\u003ecomplete combined assembly\u003c\/strong\u003e — touch glass panel and LCD display together as a single unit. You receive both components pre-assembled. If you only need to replace the touch glass overlay (because your LCD is functioning correctly and only the touch surface is damaged), that is a different part. The complete assembly replacement is appropriate when the LCD has failed, when both components need replacing simultaneously, or when performing a full panel refurbishment. Ordering the full assembly when only the touch glass needs replacing is more expensive but eliminates the risk of damaging the LCD during glass separation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ4: Why does this CNC panel use resistive touch instead of capacitive like modern smartphones?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eResistive touch is the industry standard for CNC operator panels for a practical reason: it responds to \u003cstrong\u003ephysical pressure regardless of what's applying it\u003c\/strong\u003e. A machinist wearing heavy-duty work gloves, nitrile chemical-resistant gloves, or cut-resistant gloves can operate a resistive touch panel without removing them — a capacitive screen requires bare skin contact. Additionally, resistive panels work correctly when hands are covered with coolant, cutting oil, or metal chips, conditions that would cause erratic behavior on a capacitive display. For CNC environments, these characteristics outweigh the multi-touch capability that capacitive offers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ5: My Fanuc panel shows display lines or artifacts — is that definitely a panel failure, or could it be something else?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eDisplay artifacts (horizontal or vertical lines, color blocks, flickering) on a Fanuc CNC panel can have two causes. First, \u003cstrong\u003eLCD panel failure\u003c\/strong\u003e — the display itself is damaged. Second, and more commonly than people expect, \u003cstrong\u003ea failing or loose display cable\u003c\/strong\u003e between the panel and the CNC's display PCB. Before ordering a replacement panel, inspect the display cable connections at both ends — at the back of the operator panel housing and at the display controller board inside the CNC cabinet. A reseated connector sometimes resolves artifacts that look exactly like panel failure. If reseating the cable doesn't help, or if the cable shows physical damage (pinched, kinked, or connector corrosion), replace the cable first. If the artifacts persist with a known-good cable, the panel assembly itself is the likely fault.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ6: Can I replace this panel myself, or does it require a Fanuc service engineer?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePanel replacement on Fanuc CNC machines is generally within the capability of a competent maintenance technician with CNC experience — it does not require a factory-trained Fanuc service engineer in most cases. The procedure involves: powering down and locking out the machine, removing the operator panel housing (typically 4–6 screws), disconnecting the display cable and touch screen cable connectors, removing the mounting screws holding the panel assembly, installing the new assembly in reverse order, and performing a touch screen calibration after power-up. Fanuc provides panel replacement procedures in the relevant maintenance manual for each CNC series. The most important precaution is handling the panel assembly carefully — LCD glass is fragile, and the replacement unit should not be placed face-down on hard surfaces. Keep the original packaging to protect the old panel during return or disposal.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eQ7: How do I verify the A05B-2255-C105#EAW is a genuine Fanuc OEM part and not aftermarket?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eGenuine Fanuc OEM panel assemblies have the following identifiers: the Fanuc logo is printed (not a sticker) on the unit frame; the part number label on the back shows the full A05B-2255-C105#EAW designation with a Fanuc serial number and date code; the LCD cable and connector use Fanuc-standard pinout and connector types; and the unit ships in Fanuc's standard protective packaging with a Fanuc part number label on the outer box. Aftermarket panels often have subtly different connector positions, slightly different housing dimensions, and either no part number label or a printed adhesive label rather than an embossed\/genuine OEM label. For a $1,925 component on a production-critical CNC machine, sourcing from a traceable supplier and verifying these physical indicators before installation is worth the extra few minutes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/A05B-2255-C105_EAW_1_800x800_d83d846c-85e8-44ff-84ca-63824fc07dfb.jpg?v=1772775055\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"topsdevice","offers":[{"title":"Default Title","offer_id":42782143578173,"sku":null,"price":1925.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0635\/6516\/8701\/files\/A05B-2255-C105_EAW.jpg?v=1773720828","url":"https:\/\/topsdevice.com\/products\/a05b-2255-c105-eaw-genuine-a05b2255c105-eaw-fanuc-touch-screen-glass-panel-lcd-display","provider":"topsdevice","version":"1.0","type":"link"}